TD-150-BLE: Difference between revisions
→Tank calibration
| Line 268: | Line 268: | ||
Install the sensor into the tank of the installed tube in the previously drilled hole ø 30-35 mm. Make sure '''the gasket is installed''' between the sensor and the tank. After this, screw the screws from the installation kit into the previously drilled ø 3mm holes.<gallery widths="700" heights="400"> | Install the sensor into the tank of the installed tube in the previously drilled hole ø 30-35 mm. Make sure '''the gasket is installed''' between the sensor and the tank. After this, screw the screws from the installation kit into the previously drilled ø 3mm holes.<gallery widths="700" heights="400"> | ||
File:Installing the sensor inside the tank.png|<big>'''Installing the sensor inside the tank'''</big> | |||
File:Screwing the self-tapping screws.png|'''<big>Screwing the self-tapping screws</big>''' | |||
</gallery>Proceed to tank calibration. This procedure will result in a "level-liters" (or "level-gallons") table that will allow your monitoring platform to convert the level values that the sensor provides into liters/gallons that are displayed in the monitoring platform reports. | </gallery>Proceed to tank calibration. This procedure will result in a "level-liters" (or "level-gallons") table that will allow your monitoring platform to convert the level values that the sensor provides into liters/gallons that are displayed in the monitoring platform reports. | ||
| Line 282: | Line 282: | ||
После перейти в меню тарировка | После перейти в меню тарировка | ||
[[ | [[File:TD-150 BLE tank calibration mobile.png|frameless]] | ||
Then, you can click '''Start''' to create a new table, or click Resume to select an existing table from your smartphone memory and continue working with it. If you click Resume, you will need to locate the table file on your Android device that you created/downloaded earlier. Select another folder using the '''Main Menu button (1)''' or using the drop-down menu '''(2)'''. Select the table and click on it '''(3)'''<gallery mode="nolines" widths="300" heights="700"> | Then, you can click '''Start''' to create a new table, or click Resume to select an existing table from your smartphone memory and continue working with it. If you click Resume, you will need to locate the table file on your Android device that you created/downloaded earlier. Select another folder using the '''Main Menu button (1)''' or using the drop-down menu '''(2)'''. Select the table and click on it '''(3)'''<gallery mode="nolines" widths="300" heights="700"> | ||
File:Tank calibration page.jpg|'''<big>Start or Continue tank calibration</big>''' | |||
File:Folder search.png|'''<big>Selecting a tank calibration table file for resuming the tank calibration</big>''' | |||
</gallery>If you click Start, you will also need to select the folder in which the table will be saved '''(2)''' and click the button to select it '''(3)''' | </gallery>If you click Start, you will also need to select the folder in which the table will be saved '''(2)''' and click the button to select it '''(3)''' | ||