TD-600: Difference between revisions

The default network address of the sensor is 1; if more than one unit is installed or other LLS devices are added, the network address on the sensor may need to be changed. The network address of each sensor must also be specified in the settings of the receiving device (navigation terminal).<blockquote>'''<big>Attention!!! There cannot be two devices with the same network address on the same line; this will cause a conflict.</big>'''</blockquote>Для смены сетевого адреса введите новый адрес в диапазоне '''0-255''' нажмите "'''Изменить сетевой адрес'''" ('''1'''), '''введите новый адрес''' ('''2'''), нажмите "'''ОК'''"('''3'''), после необходимо произвести '''"Поиск датчиков"(4)''', для подключения к датчику с новым адресом.