TD-500: Difference between revisions
→Setting the mode, range and network address
| Line 221: | Line 221: | ||
Select the mode you need('''1''') and click '''“Save parameters to device”'''('''2''') | Select the mode you need('''1''') and click '''“Save parameters to device”'''('''2''') | ||
[[ | [[File:TD-500 modes.png|frameless|697x697px]] | ||
*'''Passive RS485''' should be selected when you plan to connect to line A and B of the terminal's RS-485 interface. The terminal must have the function of polling sensors, for example, requesting information from them. The terminal must be able to interrogate sensors in accordance with the '''LLS protocol''' or '''MODBUS protocol ([[MODBUS ТД-500|описание]])''' | *'''Passive RS485''' should be selected when you plan to connect to line A and B of the terminal's RS-485 interface. The terminal must have the function of polling sensors, for example, requesting information from them. The terminal must be able to interrogate sensors in accordance with the '''LLS protocol''' or '''MODBUS protocol ([[MODBUS ТД-500|описание]])''' | ||