TD-150-BLE: Difference between revisions

At the moment, Navtelecom and GlonassSoft terminals have the ability to configure wired Escort FLS by remotely connecting to the nav terminal without using the above commands. This can be done according to these instructions:

It is also possible to send commands via SMS commands or tracker terminal.

 

 First you need to open the [https://www.fmeter.ru/download/_ftp/all/dut/FLS_Configurator.zip?v=210521143455 ПК-конфигуратор Эскорт]; The converter and/or tracker must be disconnected from the computer. In the '''Service''' tab, click on the '''Remote control''' option.

A window for generating commands for sending will open:

Here you need:

# Choose what type of commandd to generate

# Specify the current network address of the sensor to which the command will be sent

# Specify the parameters that need to be changed by this command

# Click on the '''Generate''' button

# Then you need to send the selected part of the command via the tracker configurator or by SMS message to the number of the current SIM card of this GPS terminal

ATTENTION: if a password is set on the sensor, you must first send a command to enter the password, and then the command that you need.  

To decrypt the response to the sent command, you need:

# Copy that part of the response from the tracker that begins with 3E01..., and paste it into the input/output field in the Remote control tab of the Escort configurator

# Click on '''Decode reply'''