TD-BLE: Difference between revisions
→Replacing the battery in the current design of TD-BLE
| Line 606: | Line 606: | ||
== '''<big>Replacing the battery in the current design of TD-BLE</big>''' == | == '''<big>Replacing the battery in the current design of TD-BLE</big>''' == | ||
Remove the sensor's protective cover using a screwdriver or other thin object. | Remove the sensor's protective cover using a screwdriver or other thin object. | ||
[[ | [[File:Removing new design cap TD-BLE.png|none|thumb|421x421px|'''<big>Removing the TD-BLE protective cover</big>''']] | ||
Remove the cover from the battery holder by unscrewing the screws holding it in place. | Remove the cover from the battery holder by unscrewing the screws holding it in place. | ||
[[ | [[File:Sensor head without protective cover, with dedicated battery compartment mounts.png|none|thumb|410x410px|'''<big>Sensor head without protective cover, with dedicated battery compartment mounts</big>''']] | ||
Carefully remove the top layer of lithol using a thin, non-sharp object. | Carefully remove the top layer of lithol using a thin, non-sharp object. | ||
[[ | [[File:Battery holder cavity filled with lithol.png|none|thumb|425x425px|'''<big>Battery holder cavity filled with lithol</big>''']] | ||
Remove the battery. When replacing the battery, please note that the current TD-BLE may use a battery model that is different from the one that corresponds to the previous sensor housing; namely: Saft LS17500 (ordered as a separate option). | |||
[[ | [[File:Saft batteries LS 17500 and LS14500.png|none|thumb|401x401px|'''<big>Saft batteries LS 17500 and LS14500</big>''']] | ||
After you have replaced the battery and checked the functionality of the sensor using a mobile application, the holder with the battery inside should also be filled with lithol. | After you have replaced the battery and checked the functionality of the sensor using a mobile application, the holder with the battery inside should also be filled with lithol. | ||