136
edits
TD-BLE: Difference between revisions
→How and why to calibrate sensors?
| Line 123: | Line 123: | ||
Therefore you should: | Therefore you should: | ||
# Insert the plastic centralizer provided into the tubes [[File:Centralizer.png]] [[File:Centralizer-Centrator.png|512x512px]] | # Insert the plastic centralizer provided into the tubes | ||
[[File:Centralizer.png]] | |||
[[File:Centralizer-Centrator.png|512x512px]] | |||
# Fill the tubes with fuel by covering the drain holes with electrical tape and turning the sensor upside down or immersing the sensor in fuel so that the fuel reaches the flange of the sensor (the drain holes are open). The first method is preferable<gallery widths="350" heights="300" mode="nolines"> | # Fill the tubes with fuel by covering the drain holes with electrical tape and turning the sensor upside down or immersing the sensor in fuel so that the fuel reaches the flange of the sensor (the drain holes are open). The first method is preferable<gallery widths="350" heights="300" mode="nolines"> | ||
File:Closing the drain holes, rotating the sensor, and filling the tubes with fuel.png|'''Closing the drain holes, rotating the sensor, and filling the tubes with fuel''' | File:Closing the drain holes, rotating the sensor, and filling the tubes with fuel.png|'''Closing the drain holes, rotating the sensor, and filling the tubes with fuel''' | ||