TD-BLE + Howen Dashcam quickstart

From Escort Knowledge Base
Revision as of 01:58, 8 December 2025 by VLADISLAV (talk | contribs) (Created page with "== '''<big>Introduction</big>''' == In this article the paring steps between the '''Escort TD-BLE''' sensor and the '''Howen MC30''' dashcam will be covered. '''''SCREEN''''' == '''<big>TD-BLE configuration</big>''' == In general, the TD-BLE sensor doesn't require any adjustment in terms of data transmission. The only aspect is, make sure that the sensor's data encryption ('''2''') is disabled, it can be accessed in the Additional settings menu ('''1'''). '''''SCREEN...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

In this article the paring steps between the Escort TD-BLE sensor and the Howen MC30 dashcam will be covered.

SCREEN

TD-BLE configuration

In general, the TD-BLE sensor doesn't require any adjustment in terms of data transmission. The only aspect is, make sure that the sensor's data encryption (2) is disabled, it can be accessed in the Additional settings menu (1).

SCREEN

Howen MC30 dashcam configuration

One of the most comfortable ways to configure the MC30 dashcam is using the iTool mobile app.

power up

WiFi

mobile app

Data observation in the dashcam's telemetry

Retrieved from "https://wikien.escortsensors.com/index.php?title=TD-BLE_%2B_Howen_Dashcam_quickstart&oldid=1617"