TD-150: Difference between revisions
→Calibration without fuel
| Line 490: | Line 490: | ||
In this case, make sure that the sensor tubes are empty, there is no fuel in them, but the centralizer must be inserted into the tubes. Leave the '''"Calibrate without fuel"''' switch ('''1''') active ('''green''') and press '''"Calibrate"''' ('''2''') . The values above the Empty and Full buttons will change automatically. | In this case, make sure that the sensor tubes are empty, there is no fuel in them, but the centralizer must be inserted into the tubes. Leave the '''"Calibrate without fuel"''' switch ('''1''') active ('''green''') and press '''"Calibrate"''' ('''2''') . The values above the Empty and Full buttons will change automatically. | ||
[[ | [[File:Wired calibration with fuel mobile.png|frameless|768x768px]] | ||
If you calibrate the sensor without fuel, the operating range may change slightly. | If you calibrate the sensor without fuel, the operating range may change slightly. | ||
| Line 514: | Line 514: | ||
Go to Settings | Go to Settings | ||
[[ | [[File:Wired mobile settings button.png|frameless|806x806px]] | ||
Select the mode you need('''1''') and press '''“Set parameters”'''('''2''') | Select the mode you need('''1''') and press '''“Set parameters”'''('''2''') | ||
[[ | [[File:Wired mode settings mobile.png|frameless|801x801px]] | ||
[[ | [[File:Wired set parameters mobile.png|frameless|798x798px]] | ||
- '''Passive RS485''' should be selected when you plan to connect to line A and B of the terminal's RS-485 interface. The terminal must have the function of polling sensors, for example, requesting information from them. The terminal must be able to interrogate sensors in accordance with the '''LLS protocol'''. | - '''Passive RS485''' should be selected when you plan to connect to line A and B of the terminal's RS-485 interface. The terminal must have the function of polling sensors, for example, requesting information from them. The terminal must be able to interrogate sensors in accordance with the '''LLS protocol'''. | ||