TD-BLE + Howen Dashcam quickstart

Introduction

In this article the paring steps between the Escort TD-BLE sensor and the Howen MC30 dashcam will be covered.

SCREEN

TD-BLE configuration

In general, the TD-BLE sensor doesn't require any adjustment in terms of data transmission. The only aspect is, make sure that the sensor's data encryption (2) is disabled, it can be accessed in the Additional settings menu (1).

SCREEN

Howen MC30 dashcam configuration

One of the most comfortable ways to configure the MC30 dashcam is using the iTool mobile app.

To be able to connect to the device, you need to power it up with a 24V power source (be advised that a 12V power source will not do for it).

Once the dashcam is on, you will hear a short beep sound from it. After that, you will have 3 minutes to connect to the device's WiFi with a smartphone for the further configuration. The WiFi's default password is 12345678.

SCREEN

mobile app