TD-600: Difference between revisions
→Basic terms and concepts
| Line 34: | Line 34: | ||
'''''Active (periodic) RS-485''''' - operating mode in which the sensor, without waiting for a request from the receiver, itself transmits packets with command data within 2 seconds. | '''''Active (periodic) RS-485''''' - operating mode in which the sensor, without waiting for a request from the receiver, itself transmits packets with command data within 2 seconds. | ||
'''RS-232''' - | '''RS-232''' - digital data transmission mode. It works according to '''LLS and ASCII''' protocol, if there is a '''LLS''' request the sensor responds according to '''LLS''' protocol if there is no request the sensor actively outputs data in ASCII format. On the basis of '''CNT''' the value in conventional units of the selected range is formed (1-1023 units or 1-4095 units). On sensors with a serial number higher than '''26339 RS-485 and''' '''RS-232 work in parallel.''' | ||
'''''Analog''''' - mode in which a corresponding voltage is generated based on the CNT in the approximate range of 0.2-5V. | '''''Analog''''' - mode in which a corresponding voltage is generated based on the CNT in the approximate range of 0.2-5V. | ||