TD-BLE: Difference between revisions

636 bytes removed ,  2 years ago
Line 575: Line 575:
If none of the above helps, we recommend contacting our tech support.
If none of the above helps, we recommend contacting our tech support.


= '''<big>Обновление прошивки (FW)</big>''' =
= '''<big>Firmware update (FW)</big>''' =
[[Файл:Обновление прошивки TD-BLE.gif]]
[[Файл:Обновление прошивки TD-BLE.gif]]


Для обновления прошивки на TD-BLE:
To update the firmware on the TD-BLE:


* Скачайте актуальную версию прошивки как файл в память телефона
* Download the current firmware version as a file to the phone memory
* Подключитесь к датчику
* Connect to the sensor
*Перейдите в "'''Доп. возможности'''"
*Go to “'''Additional Features'''


[[Файл:Android TD-BLE доп. возможности.png|798x798пкс]]
[[Файл:Android TD-BLE доп. возможности.png|798x798пкс]]


*Перейдите в режим обновления
*Go to FW update


[[Файл:Переход в режим обновления TD-BLE.png]]
[[Файл:Переход в режим обновления TD-BLE.png]]


*Выберите файл прошивки('''1''') из памяти телефона (Файлом прошивки является сам .zip архив, разархивировать не нужно) и начните процесс прошивки ('''2'''). '''<big>Эти действия необходимо произвести в течении 30 секунд после перехода в режим обновления!</big>'''  
*Select the firmware file ('''1''') from the phone memory (The firmware file is the .zip archive itself, no need to unzip it) and start the flashing process ('''2'''). '''These actions should be performed within 30 seconds after entering update mode!'''


[[Файл:Начало прошивки TD-BLE.png|877x877пкс]]
[[Файл:Начало прошивки TD-BLE.png|877x877пкс]]


*Процесс прошивки должен начаться. '''<big>В процессе прошивки нельзя закрывать или сворачивать приложение!</big>'''  
*The flashing process should start. '''Do not close or minimize the application during the flashing process!'''


[[Файл:Процесс прошивки TD-BLE.png]]
[[Файл:Процесс прошивки TD-BLE.png]]


*По окончанию прошивки выйдет оконо об удачном обновлении
*When the updating is completed, a window will pop up indicating that the update was successful


[[Файл:Обновление TD-BLE завершено .png]]
[[Файл:Обновление TD-BLE завершено .png]]


Обновление прошивки через мобильное приложение IOS показано в [https://youtu.be/_eb7s-1QJXo данном видео]  
Firmware update via the IOS mobile application is shown in [https://youtu.be/rPsI1AdrTQs this video]  


Актуальные прошивки вы можете найти в [https://www.fmeter.ru/download/#tdble разделе загрузки.]
Up-to-date firmware can be found in the [https://www.fmeter.ru/en/download/#tdble download section.]


Файлом прошивки является сам .zip архив, разархивировать не нужно.
The firmware file is the .zip archive itself, no need to unzip.


= '''How to change the battery''' =
= '''How to change the battery''' =
1,060

edits