TD-BLE: Difference between revisions
→Level 7000
m (→Level 7000) |
|||
| Line 635: | Line 635: | ||
You should clean the sensor tubes preferably by flushing them with the clean fuel and blowing them through the drain holes with compressed air. | You should clean the sensor tubes preferably by flushing them with the clean fuel and blowing them through the drain holes with compressed air. | ||
If this error occurred after the start of operation of the sensor, it means that most likely these impurities got into the sensor tubes from the tank and in this case it is also needed to ensure that the tank itself doesn't contain any | If this error occurred after the start of operation of the sensor, it means that most likely these impurities got into the sensor tubes from the tank and in this case it is also needed to ensure that the tank itself doesn't contain any contaminations. Clean the tank, if necessary. Note that a fuel level sensor installed outside a contaminated tank may function correctly, but the same sensor installed in such a tank may generate this error code. | ||
== '''<big>Level 6500</big>''' == | == '''<big>Level 6500</big>''' == | ||