ID-TAG: Difference between revisions
| Line 11: | Line 11: | ||
Launch the app. Activate '''Bluetooth''' and '''geolocation''' on your smartphone also check if application have access to geolocation. | Launch the app. Activate '''Bluetooth''' and '''geolocation''' on your smartphone also check if application have access to geolocation. | ||
[[ | [[File:Screenshot 20240221-094919 One UI Home.png|frameless]] [[File:Screenshot 20240221-095105 Permission controller.png|frameless]] | ||
[[Файл:Подключение к ID TAG.gif]] | [[Файл:Подключение к ID TAG.gif]] | ||
| Line 17: | Line 17: | ||
* Press the '''Sensor Settings''' button. Next, select '''ID-TAG'''. | * Press the '''Sensor Settings''' button. Next, select '''ID-TAG'''. | ||
[[ | [[File:Sensor settings. Main page.png|frameless]] [[File:ID-TAG menu .png|frameless]] | ||
* Find the required sensor by typing the last 6 digits of its serial number. You can find the serial number on the sensor head. | * Find the required sensor by typing the last 6 digits of its serial number. You can find the serial number on the sensor head. | ||
| Line 23: | Line 23: | ||
You can also simply select the required sensor from the list and click the '''Connect''' button. | You can also simply select the required sensor from the list and click the '''Connect''' button. | ||
[[ | [[File:ID-TAG connection.png|frameless]] | ||
== '''<big>Main tag parameters</big>''' == | == '''<big>Main tag parameters</big>''' == | ||
[[ | [[File:ID-TAG parameters.png|frameless]] | ||
# RSII - signal strength dBm | # RSII - signal strength dBm | ||
| Line 44: | Line 44: | ||
You can set, change and delete a password in the '''Additional Features'''. | You can set, change and delete a password in the '''Additional Features'''. | ||
[[ | [[File:ID-TAG additional features.png|frameless]] | ||
Then, in the field that appears named "Password for changing settings", enter the password that you want be used later and click '''Enter'''. | Then, in the field that appears named "Password for changing settings", enter the password that you want be used later and click '''Enter'''. | ||
[[ | [[File:ID-TAG password.png|frameless]]<blockquote>'''<big><u>PLEASE NOTE THAT THE PASSWORD RESET PROCEDURE CAN BE VERY TIME-CONSUMING. WE RECOMMEND THAT YOU TAKE A RESPONSIBLE APPROACH IN SETTING YOUR PASSWORD AND SAVING IT.</u></big>'''</blockquote>'''<big>Also note that the password cannot start with 0.</big>''' | ||
To delete a previously set password, you must enter it in the Password field, and then press the '''Enter''' and then the '''Delete''' buttons. | To delete a previously set password, you must enter it in the Password field, and then press the '''Enter''' and then the '''Delete''' buttons. | ||
| Line 57: | Line 57: | ||
To go to the parameter settings, click on the corresponding window | To go to the parameter settings, click on the corresponding window | ||
[[ | [[File:ID-TAG parameters list.png|frameless]] | ||
== '''<big>1. Operating mode</big>''' == | == '''<big>1. Operating mode</big>''' == | ||
In this window you can set the tag operation mode | In this window you can set the tag operation mode | ||
[[ | [[File:ID-TAG operating mode.png|frameless]] | ||
* iBeacon - основной режим работы метки в связке с [[BA-BLE#Фильтр по ID метки|BA-BLE]], передается Major и Minor ID по протоколу iBeacon | * iBeacon - основной режим работы метки в связке с [[BA-BLE#Фильтр по ID метки|BA-BLE]], передается Major и Minor ID по протоколу iBeacon | ||
| Line 76: | Line 76: | ||
Minor ID (Individual Tag ID) can be in the range of 0-65535 | Minor ID (Individual Tag ID) can be in the range of 0-65535 | ||
[[ | [[File:ID-TAG iBeacon.png|frameless]] | ||
== '''<big>3. Tag ID via Eddystone protocol</big>''' == | == '''<big>3. Tag ID via Eddystone protocol</big>''' == | ||
In this window you can set the tag ID for Eddystone protocol transmission | In this window you can set the tag ID for Eddystone protocol transmission | ||
[[ | [[File:ID-TAG Eddystone.png|frameless]] | ||
== '''<big>4. Eddystone URL link</big>''' == | == '''<big>4. Eddystone URL link</big>''' == | ||
In this window you can set the URL link to be transmitted by the tag when it is transmitted via the Eddystone URL protocol | In this window you can set the URL link to be transmitted by the tag when it is transmitted via the Eddystone URL protocol | ||
[[ | [[File:ID-TAG Eddystone URL.png|frameless]] | ||
== '''<big>5. Data transmission interval</big>''' == | == '''<big>5. Data transmission interval</big>''' == | ||
| Line 93: | Line 93: | ||
In conjunction with BA-BLE and the use of timer and RSSI filters, it is desirable to set the sending frequency to at least 1 second. | In conjunction with BA-BLE and the use of timer and RSSI filters, it is desirable to set the sending frequency to at least 1 second. | ||
[[ | [[File:ID-TAG data transmission.png|frameless]] | ||
== '''<big>6. Data transmission power</big>''' == | == '''<big>6. Data transmission power</big>''' == | ||
| Line 102: | Line 102: | ||
When used with other devices without filtering, you can limit the reception radius of the tag by using the transmission strength. | When used with other devices without filtering, you can limit the reception radius of the tag by using the transmission strength. | ||
[[ | [[File:ID-TAG data trasmission time.png|frameless]] | ||
= '''<big>Connecting to the receiving device</big>''' = | = '''<big>Connecting to the receiving device</big>''' = | ||
| Line 121: | Line 121: | ||
* Go to “ '''Additional features'''” ('''1''') | * Go to “ '''Additional features'''” ('''1''') | ||
[[ | [[File:ID-TAG additional features.png|frameless]] | ||
* Go to firmware update mode | * Go to firmware update mode | ||
[[ | [[File:ID-TAG FW update menu.png|frameless]] | ||
* Select the firmware file ('''1''') from the phone memory (The firmware file is the .zip archive itself, no need to unzip it) and start the flashing process ('''2'''). '''These actions should be performed within 30 seconds after entering update mode!''' | * Select the firmware file ('''1''') from the phone memory (The firmware file is the .zip archive itself, no need to unzip it) and start the flashing process ('''2'''). '''These actions should be performed within 30 seconds after entering update mode!''' | ||
[[ | [[File:Start of TD-BLE update.png|frameless]] | ||
* The flashing process should start. '''Do not close or minimize the application during the flashing process!''' | * The flashing process should start. '''Do not close or minimize the application during the flashing process!''' | ||
[[ | [[File:TD-BLE update process.jpg|frameless]] | ||
* When the updating is completed, a window will pop up indicating that the update was successful | * When the updating is completed, a window will pop up indicating that the update was successful | ||
[[ | [[File:The TD-BLE update has been completed.jpg|frameless]] | ||
Актуальные прошивки вы можете найти в [https://www.fmeter.ru/download/?product=wirelessetag#wirelessetag разделе загрузки.] | Актуальные прошивки вы можете найти в [https://www.fmeter.ru/download/?product=wirelessetag#wirelessetag разделе загрузки.] | ||
Revision as of 09:58, 25 December 2024
Bluetooth метка ID-TAG предназначена для передачи идентификационных данных по беспроводному каналу связи на устройство оснащенное интерфейсом BLE, или приемник сигнала BA- BLE 5.0 LR, для систем идентификации, свой-чужой, контроль прицепного оборудования и тп.
Более подробные технические характеристики представлены в тех.паспорте устройства.
Connecting to ID-TAG
Настройка BA-BLE полностью производится через bluetooth с помощью мобильного приложения доступное на iOS и Android устройствах (далее “приложение”).
Launch the app. Activate Bluetooth and geolocation on your smartphone also check if application have access to geolocation.
- Press the Sensor Settings button. Next, select ID-TAG.
- Find the required sensor by typing the last 6 digits of its serial number. You can find the serial number on the sensor head.
You can also simply select the required sensor from the list and click the Connect button.
Main tag parameters
- RSII - signal strength dBm
- Battery voltage V, operating voltage 3.2-3.7
- Serial number ID-TAG
- Firmware version F.W.
- Tag operation mode
- Tag ID via iBeacon protocol
- Tag ID via Eddystone protocol
- Eddystone URL link
- ID-TAG transmission interval
- ID-TAG transmission power
Setting a password
It is strongly recommend that you set a password on the sensor in order to restrict access to its settings. When you connect for the first time, the application will ask you to set a password automatically.
You can set, change and delete a password in the Additional Features.
Then, in the field that appears named "Password for changing settings", enter the password that you want be used later and click Enter.
PLEASE NOTE THAT THE PASSWORD RESET PROCEDURE CAN BE VERY TIME-CONSUMING. WE RECOMMEND THAT YOU TAKE A RESPONSIBLE APPROACH IN SETTING YOUR PASSWORD AND SAVING IT.
Also note that the password cannot start with 0.
To delete a previously set password, you must enter it in the Password field, and then press the Enter and then the Delete buttons.
Attention! By default, there is no password set on the sensor! If you connected the sensor and a password was already set on it, contact technical support.
Parameter settings
To go to the parameter settings, click on the corresponding window
1. Operating mode
In this window you can set the tag operation mode
- iBeacon - основной режим работы метки в связке с BA-BLE, передается Major и Minor ID по протоколу iBeacon
- Eddystone UID - Передается UID по протоколу Eddystone
- Eddystone URL - Передается URL ссылка по протоколу Eddystone
- Смешанный - метка передает данные по всем протоколам одновременно
2. Tag ID via iBeacon protocol
In this window, you can set the ID of the tag when transmitting via iBeacon protocol.
Major ID ( Tag Group) can be in the range of 0-255
Minor ID (Individual Tag ID) can be in the range of 0-65535
3. Tag ID via Eddystone protocol
In this window you can set the tag ID for Eddystone protocol transmission
4. Eddystone URL link
In this window you can set the URL link to be transmitted by the tag when it is transmitted via the Eddystone URL protocol
5. Data transmission interval
In this window, you can set the data transmission frequency of the tag.
In conjunction with BA-BLE and the use of timer and RSSI filters, it is desirable to set the sending frequency to at least 1 second.
6. Data transmission power
In this window, you can set the data transmission power of the tag.
When used with BA-BLE, it is desirable to set the signal strength as 0 or 3 dBm.
When used with other devices without filtering, you can limit the reception radius of the tag by using the transmission strength.
Connecting to the receiving device
Подключение к BA-BLE описано в данной инструкции.
Подключение к трекерам Глонассофт описано в данной инструкции.
Подключение к трекерам Телтоника описано в данной инструкции.
Firmware update (FW)
Download the firmware file to the phone memory in advance, the current version can be found в разделе загрузки.
Файл:Обновление прошивки ID-TAG.gif
To update the firmware:
- Connect to the sensor
- Go to “ Additional features” (1)
- Go to firmware update mode
- Select the firmware file (1) from the phone memory (The firmware file is the .zip archive itself, no need to unzip it) and start the flashing process (2). These actions should be performed within 30 seconds after entering update mode!
- The flashing process should start. Do not close or minimize the application during the flashing process!
- When the updating is completed, a window will pop up indicating that the update was successful
Актуальные прошивки вы можете найти в разделе загрузки.
The firmware file is the .zip archive itself, no need to unzip.