View source for Sokol-M1 + Sokol-DVP (Sokol-BMVD)

[[es:Sokol-M1 + Sokol-DVP (Sokol-BMVD)]]
[[File:Bmvd+dvp main.png|thumb|384x384px|Sokol-BMVD '''(on the right)''', Sokol-DVP '''(on the left)''']]

= <big>'''Definition and Purpose of Sokol-DVP and Sokol-BMVD'''</big> =

== <big>'''Sokol-DVP'''</big> ==
The '''Sokol-DVP''' soil moisture and temperature sensor (hereinafter referred to as '''“Sokol-DVP”, “the device”, “DVP”,''' or '''“the DVP sensor”''') is designed to determine the mass fraction of soil moisture (hereinafter referred to as soil humidity) and '''soil temperature.'''  

The '''Sokol-DVP''' sensor is a fiberglass '''(FR4)''' plate in the shape of an elongated trapezoid with a pointed end for easy installation in the ground.

The measuring part of the sensor contains '''capacitive sensing elements''', insulated by two layers of fiberglass. The electronic board is located inside a rectangular casing.

The operating principle for temperature measurement is based on '''the change in resistance depending on soil temperature.'''

More detailed technical characteristics are presented in the  [https://drive.google.com/file/d/1WBmJWBZqSngEo19GLjMTBAyGJz-OC1AD/view technical data sheet of the device]

== '''Sokol-BMVD''' ==
The '''Sokol-BMVD''' wireless external sensor modules (hereinafter referred to as '''“BMVD” or “the device”''') are designed for automatic reading of '''soil temperature, soil moisture, and detection of the presence or absence of moisture on plant leaves''' or other surfaces '''(leaf moisture)'''.

The module receives readings from four independent inputs connected to up to four external sensors and transmits all collected data to the '''Sokol-M1''' weather station via a '''LoRa 433 MHz wireless channel''' during the next communication session.

Up to '''eight BMVD modules''' can be connected to one station.

Each BMVD can connect up to '''four soil moisture/temperature sensors (Sokol-DVP)''' and/or '''one leaf moisture sensor (Sokol-DVL)''', depending on the supplied model.

The communication range between the '''station''' and a '''BMVD module''' can reach '''up to 5 km''' under direct line-of-sight conditions without interference. For best performance, there should be '''no obstacles''' between the antennas of the station and the BMVD. The '''BMVD''' module should be mounted at a certain height '''above the ground.'''

(''Note: Production of the '''Sokol-DVL''' leaf moisture sensor has been stopped.'')

More detailed technical specifications are provided in the documentation (under review).

= '''Device construction''' =
== '''Sokol-BMVD''' ==
Currently, '''Sokol-BMVD''' has several design versions:

'''1) Version powered by three AA batteries'''
* Supports up to '''three Sokol-DVP''' sensors and '''one Sokol-DVL''' sensor.  (''The '''Sokol-DVL''' sensor is no longer produced.'')

[[File:SOKOL BMVD OLD HOUSING 1.jpg|border|left|frameless|630x630px]]
[[File:SOKOL BMVD OLD HOUSING 3.jpg|frameless|632x632px]]


'''Device elements:'''

# Channel '''selector'''
# '''SET''' button
# '''RESET''' button
# Green LED indicator
# Red LED indicator
# Seal area
# Inputs for '''Sokol-DVP''' sensors
# Input for '''Sokol-DVL''' sensor (in newer versions, this input is used for an additional '''Sokol-DVP''' sensor)

[[File:SOKOL-BMVD scheme.png|center|frameless|755x755px]]'''2) Solar-powered version'''
* Supports up to '''four Sokol-DVP''' sensors.
* Equipped with a '''solar photovoltaic panel''' and '''rechargeable battery'''.

[[File:BMVD SUN BATTERY.jpg|border|left|frameless|601x601px]]
[[File:BMVD SUN BATTERY 2.jpg|frameless|603x603px]]

== '''Sokol-DVP''' ==
Currently, '''Sokol-DVP''' also has several design versions:

'''1.Old-type housing:''' early rectangular design.
[[File:DVP OLD HOUSING .jpg|center|frameless|692x692px]]



'''2.New-type housing:''' updated design with improved sealing and connector layout.
[[File:DVP NEW HOUSING .jpg|center|frameless|704x704px]]

= <big>'''Connection Methods Between Sokol-DVP and Sokol-M1'''</big> =
The '''Sokol-DVP''' sensor can be connected either directly to the input of the '''Sokol-M1''' station or via the '''Sokol-BMVD''' wireless module. In this case, the '''Sokol-M1''' weather station receives data from the '''Sokol-DVP''' sensors through a '''LoRa 433 MHz wireless channel'''.

== <big>'''Sokol-DVP via Sokol-BMVD'''</big> ==

# The '''Sokol-DVP''' soil moisture and temperature sensors can be connected to the inputs of the '''Sokol-BMVD''' device (inputs '''#1, #2, and #3''' for the old version). Input '''#4''' of the Sokol-BMVD operates in '''analog signal measurement mode''' and is used to connect the '''Sokol-DVL''' leaf moisture sensor. The '''Sokol-DVL''' leaf moisture sensor is currently not in production.
# The '''Sokol-DVP''' soil moisture and temperature sensor can be connected to the inputs of the '''Sokol-BMVD''' device in the '''new version''' (to '''all four inputs'''; connection of the '''Sokol-DVL''' sensor is not supported in this version).

Below are the '''connection diagrams''' for '''Sokol-DVP''' sensors with different versions of the '''Sokol-BMVD''' module:
[[File:SOKOL-BMVD+SOKOL-DVP (OLD HOUSING).png|center|thumb|629x629px|Connection diagram for the new model '''Sokol-DVP''' + '''Sokol-BMVD''']]
[[File:SOKOL-BMVD+SOKOL-DVP (NEW HOUSING).png|center|thumb|634x634px|Connection diagram for the new model '''Sokol-DVP/DVL''' + '''Sokol-BMVD''']]

== <big>'''Sokol-DVP + Sokol-BMVD - Configuration via PC'''</big> ==
To configure the '''Sokol-DVP + Sokol-BMVD''' setup, connect the '''Sokol-M1''' station to a PC using a '''USB cable''' and the '''SokolCFG configurator'''.

After connecting the station, you must '''enter the password''' to gain access to modify the station’s settings.
[[File:SOKOL CFG MAIN.png|center|frameless|761x761px]]

Change the '''BMVD request period''' (from '''5 to 60 minutes''').

Set the '''channel number (2)''' - it may be useful to change this value if the connection between the station and the BMVD is unstable. Click '''Set (3)''' to save the settings.

The station can operate on only '''one of four channels''' at a time. Therefore, each connected '''BMVD''' must have the '''same channel number''' as the station.
[[File:CFG SERVER PAGE.png|center|frameless|773x773px]]

In addition to the channel, you must enter the '''MAC address''' of the BMVD module you want to connect to this station.

You can find this address on the '''BMVD’s cover'''.
[[File:BMVD MAC COVER.jpg|center|frameless|700x700px]]

Enter the '''MAC address (1)''' and click '''Set (2)'''.

After clicking '''Read (3)''' in the right-hand window and successfully synchronizing (described below), you will be able to see the '''latest data''' received from the '''BMVD.'''
[[File:ADD DEV PAGE.png|center|frameless|750x750px]]

== <big>'''Sokol-DVP + Sokol-BMVD - Configuration via Sokol Mobile App'''</big> ==
In the '''[https://play.google.com/store/apps/details?id=com.sokolmeteo.configapp&hl=en application]''', you will be guided through a '''step-by-step setup process''' for connecting the BMVD.

Connect to the '''weather station''' and open the '''Configurator''' section.

Enter the '''service password''' - the default value is '''222'''.
[[File:SOKOL APP MAIN PAGE.jpg|border|left|frameless|667x667px]]
[[File:SOKOL APP CONNECTED STATION PAGE.jpg|frameless]]


If it doesn’t work, please contact our '''sales department manager''' to restore the password.

Select the desired '''data exchange interval''' with the '''BMVD''' and choose the '''channel number'''.

It may be useful to change the '''channel number''' if the connection between the station and the '''BMVD''' is unstable. '''Save the changes.'''
[[File:SOKOL APP SERVER CONF PAGE.jpg|center|frameless]]

Next, go to the '''Additional Devices''' section and select the '''wireless module'''.
[[File:SOKOL APP WIRELESS MODULE.jpg|center|frameless]]

Make sure the '''switch positions''' match the selected communication channel.
[[File:SOKOL APP CHANNEL PAGE.jpg|center|frameless]]

Enter the '''MAC address''' of the BMVD.

Note that '''colons should not be used'''. The number '''0''' and the letter '''O''' are different characters - ensure correct input.
[[File:SOKOL APP MAC PAGE.jpg|center|frameless]]


Click '''Next'''. After this, the '''station connection setup''' is complete - proceed to the next step.

'''''<u>(Further in the app, images with descriptions and step-by-step synchronization instructions will be provided. A more detailed explanation of synchronization is presented below.)</u>'''''

== <big>'''Sokol-DVP + Sokol-BMVD - Synchronization with Sokol-M1 Station'''</big> ==
The next step is to '''synchronize''' the operation of the station and the BMVD.

After being powered on, the weather station transmits a '''sync packet every 15 seconds''' for a period of '''three hours'''.

For the BMVD to successfully synchronize with the station, the following conditions must be met:

* The weather station must have a '''GPS or GSM connection''' to set the correct time.
* The weather station must be '''transmitting sync packets''' so that the BMVD can '''detect''' it.
[[File:CFG STATE PAGE.png|center|frameless|750x750px]]


There is also an option to activate the '''“BEACON” mode''' directly on the station to start transmitting sync packets for synchronization with the '''BMVD.'''

Once activated, this mode operates '''for 6 hours''', after which it turns off '''automatically.'''
[[File:SOKOL APP CONNECTED STATION PAGE.jpg|border|left|frameless|667x667px]]
[[File:SOKOL APP WIRELESS MODULE.jpg|frameless]]
[[File:SOKOL_APP_BEACON.jpg|border|left|frameless]]

















































To properly connect the '''BMVD''', follow these steps:

'''- Install the batteries''' in the '''BMVD''' (or connect the battery connector if you are using the '''new BMVD''' version). The '''green LED''' will light up.
[[File:INDICATOR 1 BMVD.jpg|center|frameless|805x805px]]


'''-  Place the weather station outdoors''' and '''reboot''' it by turning the key to the '''OFF''' position for '''2 minutes''', then turning it back to '''ON'''.
[[File:STATION KEY INSERT.png|center|frameless|810x810px]]


'''-''' When the '''red LED''' on the '''BMVD''' starts '''blinking (1)''', '''press and hold the SET button (2)'''. The '''green LED (3)''' will turn off.  After this, the synchronization process can be considered '''successful'''.
[[File:BMVD INDICATOR 2.jpg|center|frameless|804x804px]]
<blockquote>
'''<u>Note that the red LED on the BMVD blinks depending on the signal strength.</u>'''

 '''<u>If the LED blinks three times or fewer, you should move the BMVD closer to the station or raise it higher to improve the connection.</u>'''</blockquote>

== <big>'''Viewing Data from Sokol-DVP + Sokol-BMVD'''</big> ==
After successful synchronization, data packets from the '''BMVD''' will appear together '''with other parameters''' transmitted by the station (e.g., via '''GSM''') in the following format:
[[File:BMVD PARAMETERS - SERVER.png|center|thumb|790x790px|Example of parameters for '''Sokol-DVP + Sokol-BMVD''']]


'''<u>Example of Sokol-DVP + Sokol-BMVD Parameters:</u>'''

- '''Ex0T0''' BMVD1 DVP1 '''temperature'''

- '''Ex0H1''' BMVD1 DVP1 '''humidity'''

- '''Ex0T2''' BMVD1 DVP2 '''temperature'''

- '''Ex0H3''' BMVD1 DVP2 '''humidity'''

- '''Ex0T4''' BMVD1 DVP3 '''temperature'''

- '''Ex0H5''' BMVD1 DVP3 '''humidity'''

- '''Ex0l'''<next number>, '''Ex0U''' BMVD1 '''<u>battery voltage</u>'''

- '''Ex0R''' BMVD1 '''<u>signal strength</u>'''

 

There may also be '''<u>Ex0, Ex1, Ex2, etc</u>.''' for '''other BMVD''' modules connected to the '''same station'''.

<blockquote>''<u>'''If one DVP sensor (e.g., DVP2) is disconnected, the next one (DVP3) will shift to Ex0T2 / Ex0H3.'''</u>''

 ''<u>'''To identify which DVP was disconnected, test each sensor physically by unplugging them one by one and observing changes in the readings.'''</u>''</blockquote>

= '''Useful links''' =
* [https://rutube.ru/video/0bb6424d292325009770da690ffbf829/?playlist=718716 '''<big>Video tutorial on connecting the station via GSM to a PC (RUS)</big>''']
* [https://rutube.ru/video/d2d56e6d3bffdc783ed744f60cc68a96/?playlist=718716 '''<big>Video tutorial on setting up the station on the Sokolmeteo server (RUS)</big>''']
* [https://rutube.ru/video/ca22238af0a4258932cbb826d7d9edc8/?playlist=718716 '''<big>Video tutorial on setting up the station via a PC (RUS)</big>''']
* [https://rutube.ru/video/bf422be219631e6900f78cf250b0f026/?playlist=718716 '''<big>Video tutorial on connecting the BMVD to the station via a PC (RUS)</big>''']